RV Ceiling Light 12V–30V DC Dimmable LED with Remote and 3 Colour Temperatures
RV Ceiling Light 12V–30V DC Dimmable LED with Remote and 3 Colour Temperatures
Couldn't load pickup availability
A low-voltage ceiling light built for the wiring you already have in a camper, van, trailer or boat cabin. Runs on a DC 12–30V supply, dims from 10 to 100 per cent by remote, and cycles through three colour temperatures between 3000K and 6500K. It remembers the last setting you used, so it comes back the way you left it.
Field Notes
Warm light at low output is what you want late at night in a small cabin; cool light at full output is what you want when you are looking for something in a storage locker. Having both on one fixture, adjustable from where you are already sitting, is the practical argument for this light over a fixed dome lamp.
01Why You'll Like It
Most factory-fitted camper and cabin lights give you one colour and one brightness. That single setting is either too harsh for reading in a bunk or too dim to work by, and the switch is usually on the far side of the room from wherever you end up sitting.
This fixture solves both problems on the wiring you already have. It accepts the same 12V DC circuit that runs the rest of a camper, van, trailer or boat cabin, so there is no inverter and no separate power supply. The two-button remote handles brightness and colour from across the space, and the light comes back on at the setting you last used rather than resetting to full white.
02Key Features
Wide 12–30V DC input
The fixture runs on any DC supply between 12 and 30 volts, which covers standard 12V camper and boat circuits as well as 24V systems found in larger rigs.
Three colour temperatures
Cycle between warm and cool light across a 3000K to 6500K range — warm for evenings and sleeping areas, neutral for general use, cool for tasks and storage.
Stepped remote dimming
The brightness button steps output in 10 per cent increments between 10 and 100 per cent, or holds to sweep the full range in about 2.5 seconds.
Setting memory
The light stores the last colour and colour temperature you used and returns to it on the next power-on, instead of defaulting back to full-brightness white.
One-key switch on the fixture
A short press powers on and cycles the lighting modes; a 1.2-second hold switches off. The remote is a convenience, not a requirement for basic operation.
Straightforward screw mounting
The housing fixes with screws and wires in on two leads — red to positive, white to negative — so it drops into an existing low-voltage lighting circuit.
03Specifications
| Power input | DC 12–30V |
| Light source | LED |
| Colour temperature range | 3000K – 6500K |
| Lighting modes | 3 |
| Dimming range | 10% – 100%, in 10% steps |
| Control | On-fixture button and two-button wireless remote |
| Memory function | Recalls last colour and colour temperature |
| Mounting | Screw fixation |
| Wiring | Red lead to positive, white lead to negative |
| Intended use | Dry interior cabins — RV, camper, van, trailer, boat |
Electrical and performance figures above are manufacturer-listed and have not been independently bench-tested by ARWE.
04Package Contents
| LED ceiling light | 1 |
| Wireless remote control | 1 |
05Installation & Safety
This fixture is supplied without an ingress-protection rating, so mount it in a dry, covered interior position rather than an exposed deck, bilge or splash-prone location. If you are not confident working on vehicle or marine 12V wiring, have the installation completed by a qualified auto-electrician or marine technician.
Warm and low for the evening, cool and bright for the work — from one fixture.
Arwe · Wilderness Series
Explore Camping Lights, Solar Panels & Power
FROM THE ARWE COMMUNITY
Reviews & field notes.
Need help with an order? Get in touch
